Click image to view full size image
Vertical machining center SYIL V1000. Machinability machine workpieces weighing up to 1,000 kg of choice. Y-Frame cast iron structure, the most rigid itinerary longer, take up less space. Spindle and feed high torque servo drive motor with with doubleclaw tool changer for 16 tools magazine, speed 20m/min rapid traverse, tool change time as short as 1.6 seconds with Siemens, Syntec or Fanuc CNC system with maximum operator convenience. currently on the market the most cost-effectivelarge vertical machining center
Feature
|
-Embedded platform based on advanced control system, high reliability |
|
-7.5 Inch high-resolution true color display, the appearance of a graphical interface, easy operation |
|
- Support U disk, USB, carrying boxes, resume processing function of the breakpoint memory |
|
-Optional siemens 808D or syntec 3B cnc controller |
|
-The table size 1100 x 450mm |
|
-380V three-phase power supply |
|
-BT40 spindle size metric |
|
-Pneumatic draw bar with 16pcs tooling ATC |
|
-Integrated casting base, further increase the stability of machine tools |
|
-High-speed three-axis servo motor,high torque servo spindle motors |
|
-Taiwan's imports of hiwin linear |
|
-Imported from Taiwan OEM PMI double nut ball screw Intime |
|
-Selection of high-quality casting materials, compact |
|
-Automatic lubrication system pre-installed to protect the rail life |
|
-Safety electrical components of high quality and fast plug |
|
-Pre-installed fourth axis fast interface |
|
-Pre-loaded hand wheel controller MPG |
|
-CE and CCC safety certification |
Specification
|
Dimensions (L x W x H) |
- 3100mm x 2400mm x 2700mm |
|
Package dimensions (L x W x H) |
- 3150mm x 2450mm x 2750mm |
|
Table size |
- 1100 x 450mm |
|
T-slot size |
- 18mm |
|
Working travel |
- X-axis: 1000mm |
|
Weight |
- 5950~6000kg |
|
Spindle Speed |
- 200 ~ 8000rpm/min |
|
Spindle Power |
- 7.5kw |
|
Spindle taper |
- BT40 |
|
Input voltage |
- 380V three-phase power supply |
|
Positioning accuracy |
- ≤ 0.01mm |
|
Clamping tool diameter can be |
- 4 ~ 16mm |
|
Feed rate |
- X / Y axis: 20000mm/Min - Z-axis: 20000mm/Min |
|
Motor torque |
- X-axis servo motor: 4.0Nm |
|
Ball screw |
PMI double nut ball screw |
|
Input and output ports |
- USB, RS232 Interface: data transfer |
knowledge
Batch or other
For large quantities, the user can use a special milling machine. If it is a small batch and often repeat the cycle of repeated production, then the use of CNC milling machine is very appropriate, because the first batch of ready to work fixture, procedures can be stored and reused. In the long run, it is unavoidable to use a milling machine with a high degree of automation instead of an ordinary milling machine to reduce the labor force of the laborers.
E-mail: 